Installation Instructions

CONNECTING THE FIT TO Z CONTROL

By connecting the Fit to the Z Control

Cloud using the built-in WiFi, the user can set up free alert messages via email, text, and mobile app “push”

notications.Inaddition,theusercanverifytheFit’sreadiness,remotelysilencealarmsandresettheunit,conguresettings,andmodifyhow

noticationsaresent.Othervisualinformationsuchasinputstatusandbatterylevelareavailablethroughthewebandappinterfaces.

Before you begin:

• KnowwhatyourWiFirouterisnamed(i.e.itsSSID)anditspassword.Doublecheckyouknowthecorrectpasswordandexactlyhowitis

spelled,includingcapitalization.Thiswillpreventthemostcommontroubleshootingissues.

• Verify your WiFi router is connected to the internet.

• Verify your phone, tablet, or computer has working WiFi, can connect to your WiFi router, and that you can be close to the Fit during the

installation process.

• Create a free account at zcontrolcloud.com.

• Locate the Fit’s Device ID on the top sticker.

Connection Steps:

1. ApplyACPowertotheFit.TheZControl

LEDwillblinkandthenturnoff,indicatingtheFitisinAPMode*andistransmittinganSSID

(seeFigureB).IftheLEDisblinkingandnotinAPmode,presstheZControlbuttonfor12secondsandletgo.TheLEDwillnowbeoff,

indicatingtheFitisinAPMode.ApenortoothpickorsimilarisrequiredtopresstheZContolbutton.

ThisLEDshouldbeoffwhen

FitisinAPmode.

When user is connected to

Fit to set up WiFi, LED will

blink.

When Fit is connected to

router and Z Control

Cloud,

this LED will be solid.

*AP ModeiswhentheFitisbroadcastingits“name”,orSSID.TheSSIDisintheformatZCTL_Fit_xxxxwhere“xxxx”istherst

4digitsofyourFit’sDeviceID.TheFit’sSSIDwillshowupinyourphone/tablet/computer’slistofavailableWiFi,andselectingit

willgiveyoudirectconnectivitytotheFit.ThisisrequiredinordertogiveyourFitthepasswordcredentialsneededtoconnect

to the WiFi of your choice.

Figure A

Z Control button is underneath

thru small hole.

SelecttheFit’sSSID

Figure B

Fit