® Accessories, Controls and Package Systems Package Systems Check Valves Float Switches Alarm Systems Control Panels Rail Systems Your Peace of Mind is Our Top Priority®
WHAT SETS ZOELLER SYSTEMS APART? Since 1939, Zoeller Company has been manufacturing water pumps of many types. From pedestal pumps in the beginning to large HP submersible, non-clog pumps in recent years, we have gained invaluable manufacturing experience from our humble beginning in August Zoeller’s basement workshop. Over the years, one of our most important mottos has been, ‘We excel at 1,000 little things’. From start to finish, we take pride in our products.
915 Grinder Package Grinder Package The industry’s only 115 volt, 1/2 HP grinder pump stands up to the toughest applications where traditional sewage pumps fail.This job-ready system uses our innovative, stainless steel Tri-slice® cutter, which requires little or no maintenance. The builtin scouring system and baffle keep debris from obstructing float operation. Small yet powerful, this efficient 7 amp pump handles most debris including: socks, denim, sanitary napkins, diapers, etc.
900 Series 910 Systems Preassembled Sump Pump Systems Unassembled Simplex and Duplex Sewage Package Systems SPECIFICATIONS: • No assembly required! Drop it in the hole and go! • Pump switch is installed 180° from inlet. • Discharge pipe is plumbed with a predrilled 3/16” (5 mm) vent hole. • Electrical cord seal is installed in cover. • Cover is sealed and bolted down. • Basin is filled with environmentallysafe peanuts for safe transit.
912 Systems Sump & Sewage Basins Simplex Sewage Package Systems (job ready/assembled) SPECIFICATIONS: SPECIFICATIONS: • More choices, easier installation and fast delivery • Saves labor and reduces installation errors • 2” (50 mm) solids-handling pump • 2” PVC discharge pipe, 30” (76 cm) long on 18”x30” (46x76 cm), 24” (61 cm) long on 24”x24” (61x61 cm) and 36” (91 cm) long on 24”x36” (61x91 cm) • Available in high-density polyethylene structural foam (PSF), polyethylene or fiberglass • Ideal
Qwik Pak LS Commercial Duty Wastewater Universal Lift Station Prepackaged Lift Station While current systems require the pump to be included in the package, the Qwik Pak LS allows a Zoeller pump to be purchased separately or provided from existing stock. Gone is the headache of having to purchase a pump that you may already have in stock! The Qwik Pak LS is designed to be used in dewatering, sump, effluent, sewage or grinder systems.
Valves: Check, Ball, & Plug Full-Flow Unichecks 30-0152 / 30-0160 30-0163 / 30-0164 1-1/4” - 3” Cast Iron 30-0181 / 30-0200 1-1/4” - 1-1/2” Slip x Slip Union SPECIFICATIONS: SPECIFICATIONS: • Vertical or horizontal installation • • Full-flow design, no restrictions Flapper bends over a radius, no sharp 90° edges — lengthens life of flapper hinge • Stops backflow of water • • Standard, 1-1/4”, 1-1/2”, 2”, 3” female NPT pipe • Neoprene polyester, reinforced flapper, smooth edge design, with
ACCESSORIES AND CONTROLS Valves: Check, Ball, & Plug, continued Tri-Check® The Combo 30-0100 / 30-0101 1-1/2” - 2” PVC Check Valve/Ball Valve Union Combination 30-0102 / 30-0103 1-1/2” - 2” PVC Check Valve Union Combination SPECIFICATIONS: SPECIFICATIONS: • Full-flow check valve design • All stainless steel screws • Threaded union allows pump to be removed without disrupting discharge piping • Replaceable flapper in the check valve • Extra wide hinge to reduce stress • Rated for 25 psi, 57
Valves: Check, Ball, & Plug, continued Inline 1-1/2” - 3” Compression Unichecks 30-0238 Inline Check Valve ACCESSORIES AND CONTROLS Compression SPECIFICATIONS: • Rubber coupling with stainless steel clamps Item NO. Pipe size Weight (lbs/kg) Length (in/mm) Carton Qty • Threads into pump discharge 30-0015 1½” 1.1 lbs/0.5 kg 7½”/180 mm 12 • Pre-drilled weephole • 4.3 PSI, 10’ (3 m) of head max 30-0020 2” 1.7 lbs/0.
ACCESSORIES AND CONTROLS Switch-Mate Piggyback Variable Level Float Switch SPECIFICATIONS: • Converts nonautomatic pump to automatic pump • Simple installation • Adjustable/variable level • Standard 15’ (5 m) and 20’ (6 m) SJOW CPE cord with molded plug.
Variable Level Control Switches ACCESSORIES AND CONTROLS APPLICATIONS: • Simplex or duplex pump control and high level alarm on electrical alternating control panel systems • For dewatering, effluent and sewage applications • Switch for A-Pak SPECIFICATIONS: • Float is constructed of durable PVC/polypropylene • Standard mechanical variable level control switches are rated for 115/230V, 5 Amps • Low-current, mechanical variable level control switches are rated for 125 VAC/30 VDC, 0.
ACCESSORIES AND CONTROLS Smart Pak Plus Flood Alert 10-0804 Residential Alternator NEW System DESIGN 10-0763 High Water Alarm SPECIFICATIONS: SPECIFICATIONS: • Alternates two automatic pumps up to 1/2 HP, 12 amps each, 115V, single phase • Operates on (3) AAA batteries • Low battery alarm designed into circuit board • Warns you when sensor contacts water • Loud intermittent horn rated at 103 +/- 3 db at 1’ (30 cm) • On/Off silence switch • Stainless steel sensor contacts • Easy to instal
A-Pak Alarm Systems ACCESSORIES AND CONTROLS The “A-Pak” alarm system sounds a horn when a potentially threatening liquid level condition occurs. The horn can be silenced, but the alarm light remains on until the condition is remedied. Once the condition is cleared, the alarm will automatically reset. A green “POWER ON” light indicates 120V primary power to the alarm. A low battery chirp feature indicates when the battery should be replaced. A red “ALARM” light indicates a highlevel condition.
ACCESSORIES AND CONTROLS Electrical Simplex Control Panels An Electrical Control Panel is used on a Simplex pump application where automatic electrical cycling of the pump is desired for added protection in residential or commercial applications. A Control Panel is required for all systems using a nonautomatic pump. The built-in alarm system, a standard feature, will activate when the water level becomes unusually high.
Electrical Alternator Control Panel An Electrical Alternator is used on a Duplex pump application where automatic alternation of the pumps is desired for added protection in residential or commercial applications. With one pump operating to handle normal flow, a second pump becomes operational in the event the water level continues to rise.
ACCESSORIES AND CONTROLS Control Panels for Explosion Proof Pumps Simplex and Duplex with IntrinsicallySafe Relays These intrinsically-safe control panels are used on pump applications defined as a hazardous duty location. Lift stations in some regions fall under this classification. The intrinsically-safe panel, in conjunction with an explosionproof pump, will provide a system that will not allow ignition of explosive gases. The purpose of the control panel is to cycle a pump automatically.
Nema-4X Junction-boxes Deluxe Junction Box (Factory Assembled) PVC plastic box with removable cover for use in sewage, effluent, dewatering, or corrosive environments. Box is 4”x4”x2” (10x10x5 cm) and is field-drilled for maximum flexibility in each installation.
ACCESSORIES AND CONTROLS Disconnect & Rail Systems Z-Rail™ Threaded Rail Systems 1-1/4” - 3” NPT Discharge Pumps NEW SPECIFICATIONS: • Sewage, storm water and effluent pump systems • For concrete, steel, or fiberglass tanks • Allows for removal of pumps from ground level • No confined space entry to service pump • No pull rods or hold down rods • No diaphragms • Coupling base with positive machine fit and o-ring provides a reliable seal • Designers’ liability can be reduced by providing re
® About the Zoeller Family of Water Solutions Founded in 1939, Zoeller Company is one of the oldest independently- owned professional pump manufacturers in North America. Headquartered in Louisville, Kentucky USA, Zoeller has over 600 employees worldwide and a total of 550,000 sq. ft. of manufacturing facilities from our six operations in North America and Asia.
FM2819 0314 Supersedes New ® 3649 Cane Run Road • Louisville, KY 40211 • 502-778-2731 • 1-800-928-7867 • www.zoeller.