Specification Sheet

SECTION: 2.15.045
FM2985
1116
Supersedes
1016
TECHNICAL DATA SHEET
PREMIUM SERIES MIGHTY-MATE
Cast Iron Model 95
Submersible Sump / Dewatering Pumps
1 1/2" NPT
3 7/8" (98 mm)
4" (102 mm)
4 5/8"
6 7/32"
3 7/8" (98 mm)
(158 mm)
(117 mm)
5 3/8" (137 mm)
12 1/8" (308 mm)
SK3129
PRODUCT SPECIFICATIONS
MOTOR
Horse Power 1/2
Voltage 115
Phase 1 Ph
Hertz 60 Hz
RPM 3450
Type Permanent split capacitor
Insulation Class B
Amps 10.5
PUMP
Operation Automatic
Auto On/Off Points 9-1/2" (24 cm) / 2-1/2" (6.4 cm)
Discharge Size 1-1/2" NPT
Solids Handling 1/2" (12 mm) spherical solids
Cord Length 15' (4.6 m)
Cord Type UL listed, 3-wire, grounded plug
Max. Head 26' (7.9 m)
Max. Flow Rate 80 GPM (303 LPM)
Max. Operating Temp. 130° F (54° C)
Cooling Oil lled
Motor Protection Auto reset thermal overload
MATERIALS
Cap Cast iron
Motor Housing Cast iron
Pump Housing Cast iron
Base Cast iron
Upper Bearing Sleeve bearing
Lower Bearing Ball bearing
Mechanical Seals Carbon and ceramic
Impeller Type Non-clogging vortex
Impeller Engineered thermoplastic
Hardware Stainless steel
Motor Shaft AISI 1215 cold rolled steel
Gasket Neoprene
Product information presented
here reflects conditions at time
of publication. Consult factory
regarding discrepancies or
inconsistencies.
NOTE: See model comparison chart for specific details.
© Copyright 2016 Zoeller
®
Co. All rights reserved.
502-778-2731 | 800-928-7867 | 3649 Cane Run Road | Louisville, KY 40211-1961 | www.zoeller.com
Tested to Standard
UL778 and
Certied to CSA
Standard C22.2 No. 108
R