Spec Sheet

ManualsBrandsZoeller ManualsSewageN267 - 1/2 HP Cast Iron Submersible Sewage Pump (2") w/ LevelGuard® Sewage Switch

SECTION: 2.20.030

FM2789

0220

Supersedes

0819

TECHNICAL DATA SHEET

WASTE-MATE SERIES

Models 266 & 267 Sewage/

Euent or Dewatering Pumps

SK375

PRODUCT SPECIFICATIONS

MOTOR

Horse Power 1/2

Voltage 115 - 460

Phase 1 or 3 Ph

Hertz 60 Hz

RPM 1725

Type Permanent split capacitor

Insulation Class B

Amps 1.5 - 10.4

PUMP

Operation Automatic or nonautomatic

Auto On/Off Points 12" (30 cm) / 4" (10 cm)

Discharge Size 2" NPT

Solids Handling 2" (50 mm) spherical solids

Cord Length 10' (3 m) automatic or 15' (5 m) nonautomatic

Cord Type UL listed neoprene cord and plug

Max. Head 21.5' (6.6 m)

Max. Flow Rate 128 GPM (484 LPM)

Max. Operating Temp. 130° F (54° C)

Cooling Oil lled

Motor Protection Auto reset thermal overload (1 Ph)

MATERIALS

Cap Cast iron

Motor Housing Cast iron

Pump Housing Cast iron

Base Cast iron or engineered plastic

Upper Bearing Sleeve bearing

Lower Bearing Sleeve bearing

Mechanical Seals Carbon and ceramic

Impeller Type Non-clogging vortex

Impeller Engineered plastic w/ metal insert

Hardware Stainless steel

Motor Shaft AISI 1215 cold rolled steel

Gasket Neoprene

Min. Basin Size

Simplex: 18" x 30" (45.7 x 76.2 cm)

Duplex: 30" x 36" (76.2 x 91.4 cm)

Product information presented

here reects conditions at time

of publication. Consult factory

regarding discrepancies or

inconsistencies.

NOTE: The sizing of effluent systems normally requires variable

level float(s) controls and properly sized basins to achieve required

pumping cycles or dosing timers with nonautomatic pumps.

See model comparison chart for specific details.

* May be used in those states where codes do not restrict solids size

in efuent systems.

Tested to Standard UL778 and

Certied to CSA

Standard C22.2 No. 108

502-778-2731 | 800-928-7867 | 3649 Cane Run Road | Louisville, KY 40211-1961 | zoellerpumps.com

MODEL DIMENSIONS

MODEL A B C D E F G H

266

4-3/4” (12.1 cm) 8-5/16” (21.1 cm) 6-13/32” (16.3 cm) 4-13/16” (12.2 cm) 6-7/32” (15.8 cm)

2” NPT

14-1/4” (36.2 cm) 6-3/8” (16.2 cm)

267

4-3/4” (12.1 cm) 8-5/16” (21.1 cm) 6-13/32” (16.3 cm) 4-13/16” (12.2 cm) 6-7/32” (15.8 cm)

2” NPT

14-5/16” (36.4 cm) 6-7/16” (16.4 cm)

Summary of content (2 pages)

PAGE 1
SECTION: 2.20.030 FM2789 0220 Supersedes 0819 Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. TECHNICAL DATA SHEET WASTE-MATE SERIES Models 266 & 267 Sewage/ *Effluent or Dewatering Pumps MATERIALS PUMP MOTOR PRODUCT SPECIFICATIONS Horse Power 1/2 Voltage 115 - 460 Phase 1 or 3 Ph Hertz 60 Hz RPM 1725 Type Permanent split capacitor Insulation Class B Amps 1.5 - 10.
PAGE 2
• • • • • Model 266 features a plastic base. Model 267 feature a cast iron base. Model 267 is available with a cast iron impeller, which is standard on all 3 Ph units. BN and BE models include a variable level pump switch. Additional cord lengths are available in 15' (5 m), 35' (11 m) and 50' (15 m). PUMP PERFORMANCE CURVE MODEL 266/267 25 TOTAL DYNAMIC HEAD SPECIAL MODEL FEATURES FEET METERS SELECTION GUIDE 1. Integral float operated mechanical switch, no external control required. 2.