Specification Sheet

018512
CAUTION
All installation of controls, protection devices and wiring should be done by a
qualified licensed electrician. All electrical and safety codes should be followed including the
most recent National Electrical Code (NEC) and the Occupational Safety and Health Act (OSHA).
TOTAL DYNAMIC HEAD
FLOW PER MINUTE
TOTAL DYNAMIC HEAD
FLOW PER MINUTE
15
LITERS
0
GALLONS
20 40
5 10
0
2
5
25
100
8060
20
50
PUMP PERFORMANCE CURVE
MODEL 202/203/204
FEET
METERS
4
10
15
6
20
Shut-o Head:
15 4.6
Feet Meters
5
10
1.5
3.0
MODEL
30 ft. (9.1 m)
35 132
Gal. Liters
45
40
170
151
202/203/204
45403530
25
30
35
120 140 160 180
8
10
20 6.1 27 102
25 7.6 16 61
Qwik Jon
®
Ultima systems include:
Model 202: tank, mini grinder pump and a comfort height, ADA compliant, rear outlet toilet with elongated bowl
Model 203: tank and mini grinder pump (standard rear outlet toilet with a discharge height of 4" (101.6 mm)
from floor to centerline must be purchased separately)
Model 204: tank and mini-grinder pump without toilet inlet
© Copyright 2014 Zoeller Co. All rights reserved.
502-778-2731 | 800-928-7867 | 3649 Cane Run Road | Louisville, KY 40211-1961 | www.zoeller.com
* Not IAPMO approved.
OPTIONS
• Standard Grinder Blade: Metal-stamped cutter plate
handles typical toilet sewage. Dual cutting channels
provide over 70,000 cuts / minute. (Figure 1)
• Premium Grinder Blade: Investment-cast 440 stainless
steel cutter plate is engineered to handle cloth, latex and
other hard to grind materials. Tri-Slice
®
Cutter Technology
- three independent cutting channels provide over
250,000 cuts / minute. (Figure 2)
• Qwik Jon
®
Ultima extension kit for model 202,
for behind-the-wall installations. P/N 10-2123*
Model 202 meets the Americans with
Disabilities Act guidelines and ANSI A117.1
requirements for accessible and usable
facilities—check local codes.
FIGURE 1
FIGURE 2
SPECIFICATIONS
• Can be installed free-standing or behind a wall
• Discharge can be reduced to 3/4" to replace existing
systems
• Pumps any direction
• Shipping Weight:
Model 202: 121 lbs. (55 kg)
Model 203: 37 lbs. (17 kg)
Model 204: 33 lbs. (15 kg)
• TANK: (2) 1-1/2" (DN40) slip / 2" MPT auxilary inlets
and 1-1/2" (DN40) vent. Available in 1.6 GPF (6.1 LPF) or
1.28 GPF (4.8 LPF) systems