Ry ET STAINLESS STEEL VACUUM BOTTLE HOUSEHOLD USE ONLY Instruction Manual Please read these instructions before use, and keep for future reference. Be sure that all parts are attached firmly before each use. Important Safeguard Please follow these instructions to prevent scalding, deterioration and discoloration of beverages, as well as malfunction and staining of the product. Keep out of reach of Infants and small children. There is a risk of scalding or injury. Always clean thoroughly after use.
Important Safeguards: continued Do not use for other than intended purposes. This bottle is for holding beverages and keeping them hot or cold. Do not heat in a microwave. Doing so may cause sparks or deform or discolor the bottle. Do not carry by the Cup or Stopper. Dropping the bottle may be dangerous. Always make sure the Stopper Gasket and Spout Gasket are on. There is a risk of leak and scalding. It may also cause stains on your car, clothes and bags.
Important Safeguards: continued When filling the bottle with sports drinks: @ Rinse the Inside and outside of the Man Body (Mouth), the Stopper and the Cup as soon as possible after consumption to prevent rust and/or pinholes. @ Clean the inside using a soft sponge to protect the nonstick coating from being scratched. (Scratches to the coating may cause rust and pinholes.
Warnings and Cautions: continued Do not leave a tea bag Inside and close the Stopper. The tea bag may swell and cause contents to leak or splatter. Do not attach parts other than those specifically for this product. Doing so may cause leaks or breakage. Always clean the Stopper and Stopper Gasket thoroughly after use. Not doing so may cause decay, mold, odor or discoloration. It may also cause leaks. With the Stopper attached, turn the bottle upside down to make sure it does not leak.
How to Take Care of Your Bottle: ® Clean the product after each use to prevent odors and mold, and to keep the product sanitary. Models that CANNOT be washed under water model only): {Washing under water may allow water to get Inside and cause rusting or leaking.) Soak a soft cloth In warm water and mild or dish washing liquid, wring well and wipe. Main Bo d Models that CAN be washed under water lain Body (*all other models): (© Wash with warm water and mild dish washing liquid using a soft sponge.
How to Take Care of Your Bottle: continued ® Clean the product after each use to prevent odors and mold, and to keep the product sanitary. Notes for Handling the Product @ Do not soak. @ Do not clean using paint thinner, benzine, metal wire scrub brushes, scrubbing brushes that Include abrasive cleansers, polishing powders.cleansers, melamine sponges, or any similar rems, {Doing so may damage the product ) ® Do not use chlorine type bleach.
SPECIFICATIONS: Product: STAINLESS STEEL VACUUM BOTTLE Model No. | Capacity| Weight riven Co te ion 1.3 liters 77°C (171°F) @ G hrs. | core (gee (4402) | (29 02) |53°C (127°F) @ 24 hrs, |3°C (46°F) @ E fs. literalness 09kg | 79°C (174°F) @ 6 hrs. 1c SF-CC | (51 02.) | (32 02.) | 56°C (133°F) @ 24 hrs. | © (45°F) @ 6 hrs. literalness 1.0kg | 80°C (176°F) @ 6 hrs. |, o SF-CC 50°C (138°F) @ 24 hrs. | 7 © (45°F) @ 6 hrs. bitters 1.0kg | 81°C (178°F) (yee (68 02.) | (36 02.
SPECIFICATIONS: continued Heat/Cold Retention Testing Conditions: At a room temperature of the Main Body is filled to below the Stopper with hot or cold water and left standing in an upright position. For heat retention, once the hot water reaches the temperature is measured after 6 hours and 24 hours. For cold retention, once the cold water reaches the temperature is measured after 6 hours.