RSE 0) Re Thank you for your purchase of this quality Rhinovirus product. We are confident that it will give you top performance and optimum satisfaction for many years. To ensure this, please read and follow the important guidelines below. {One on each side) Cuter Container Divider = Side Bow Forked Spoon Cover | Forked Spoon —, | Forked Spoon Holder Soup Bowl Gasket Soup Bow! @ Be sure that all parts are attached firmly before each use.
alr ln ed © Remove the Inner Bowls Undo the locks (2 locations), remove the outer lid and remove the inner bowls from the outer container. \. Preheat (Precook) Fill the Soup Bowl a. For maximum heat (cold) retention, Fill the soup bow! with hot fill the outer container, main bow! and {cold) soup, close the lid soup bow! with hot water (cold water} tightly and place in the outer for 1-2 minutes. container. b. After preheating (precolonial, discard the hot water (cold water} and wipe with a soft cloth.
HOW TO REMOVE/ATTACH THE SOUP BOWL GASKET Ts Remover Removal the gasket from the inside by using a pin or a small object and fitting if into the small opening. To Attack: Fit the gasket around the inside of the Inner lid by pushing it in with your fingers. (Make sirs the gasket Is fitted straight and is not twisted. A twisted gasket may cause contents to leak) HOW TO REMOVE/ATTACH THE VALVE PACKING The valve packing is located at the center of the soup bowl lid.
# The rating noises that may bs heard when the | Bi The lunch jar may not sufficiently keep the content outer body is shaken comes from the copper or i warm i the inch jar is used without hot soup put aluminum foil in the vacuum insulation to increase | into the soup bowl. The heat retention effect of the heat {cold) retention and does not indicate 8 i lunch jar will be enhanced if hot water is put into malfunction. | the soup bow! if no soup needs to be kept warm.