REEL JET STAINLESS MUG Instruction Manual Name of Each Part =F Lid Cover Lid Cover Gasket Stopper Cover Stopper Valve Packing Stopper Gasket [ . Mouth Ring Set Mouth Ring L . Mouth Ring Gasket mi Mouth ® Be sure that all parts are attached firmly Main Body before each use. Please read these instructions before uss, and keep for future reference.
Important Safeguards @ Please follow these instructions to prevent scalding, deterioration and discoloration of beverages, as well as malfunction and staining of the Mug. Do not allow infants or small children to use this product. Keep out of the reach of infants and small children. Mishandling may cause injury or scalding. Do not place near heat sources such as gas stoves, ovens and heaters. Doing so may cause deformation or discoloration of the Mug. Do not heat in a microwave.
Important Safeguards, Continued @ Please follow these instructions to prevent scalding, deterioration and discoloration of beverages, as well as malfunction and staining of the Mug. When filling the Mug with sports drinks: @ In order to prevent rusting and/or pinholes, rinse the inside and outside of the Main Body, the Lid Set and the Mouth Ring Set immediately after consumption. @ Clean the inside using a soft sponge to protect the nonstick coating from being scratched.
Warnings & Cautions Do not allow hot kettles to touch the Mouth Ring or the mouth of the Main Body. The Mug may tip over, causing scalds. Mouth Do not tilt the Main Body suddenly when drinking. The beverage may spill and cause scalding or stain clothes. Do not leave a tea bag inside and close the Lid Set. The tea bag may swell and cause leakage or cause drinks to spill out. Hot tea may discolor if stored for a long period of time. We recommend the use of tea bags and brewing right before consumption.
How to Take Care of Your Mug @® Clean the product after each use to prevent doers, dirt and mold, and to cheap the product sanitary. ® For better usage, please remember to clean after every use. ( Wash with warm water and mild dish washing liquid ® using a soft sponge. N Rinse, shake a few times and wipe dry. rater ® Remove the Stopper Gasket and Valve Packing from the Lid hdd Set and the Mouth Ring Gasket from the Mouth Ring before LCE washing.
How to Take Care of Your Mug, Continued To Remove Rust Spots and Water Stains: You may find rust spots or water stains caused by impurities in the water. To remove these stains, fill the Main Bede with hot water with 10% vinegar and let it stand for 30 minutes to an hour without attaching the Lid Set then wash the interior thoroughly.
How to Disassemble the Parts H Lid Set move the Lid Cover. = old the Tab and pull apart as illustrated. Pugh the Tabs in then push the Remove the Lid Cover Gasket utilizing the Small Opening. Valve Packing Stopper \. Please follow the steps in reverse to put the parts back together.
