Nod RHINOVIRUS rr STAINLESS MUG Model Instruction Manual Name of Each Part Lid Cover Lid Cover Gasket Stopper Cover Set Stopper Cover Button Safety Lock Lid Set Sip Area Stopper Cover Gasket Stopper Gasket Mouth @ Be sure that all parts are correctly placed or installed before each use. NS @ The illustrations used in this instruction manual may differ from the actual product you have purchased. Please read these instructions before use, and keep for future reference.
How to Disassemble the Lid Set: @® When you first use the product, there may be a plastic smell. However, this will become less noticeable with use. 1 Remove the Stopper. downward to remove. 2 Remove the Stopper Gasket. 3 Remove the Stopper Cover Gasket. Place your finger to the small opening on the Stopper and Stopper gently pull the Stopper Cover Cover Gasket. %Gasket off. ; Small Opening @ Be careful not to damage the gasket. 4 Remove the Lid Cover Gasket.
How to Assemble the Lid Set: ® Be sure to attach the Stopper Cover Set, Stopper and Gaskets correctly to prevent malfunction or leaking of beverages. 1 Attach the Lid Cover Gasket. Align the Small Opening on the Lid Cover Gasket with the protrusion on the Lid Cover and press to attach. i ® Bo sure to set the Lid Cover Gasket before use. 2 Attach the Stopper Cover Gasket. Attach the Stopper Cover Gasket with the ridge facing out.
How to Assemble the Lid Set: continued ® Be sure to attach the Stopper Cover Set, Stopper and Gaskets correctly to prevent malfunction or leaking of beverages. 3 Attach the Stopper Gasket. Line up the recess in the Stopper Gasket with the ridge on the Stopper, and, applying pressure from the outside in, push it into place. Push along the rim with your finger 4 Attach the Stopper. Align the opening of the Stopper Cover . Set and the tab of the Stopper, and Opening press the Stopper in to attach securely.
Important Safeguards ® Please follow these instructions to prevent scalding, deterioration and discoloration of beverages, as well as malfunction and staining of the Mug. Do not allow infants or small children to use this product. Keep out of the reach of infants and small children. Mishandling may cuss injury or scalding. Always make sure that the Gaskets are attached during use. Contents may leak and cause scalding or stains. Do not attach parts other than those specifically designed for this product.
Important Safeguards continued ® Please follow these instructions to prevent scalding, deterioration and discoloration of beverages, as well as malfunction and staining of the Mug. Do not fill with beverages while the Lid Set is attached. Doing so may cause beverages to overfill and may cause booming and scalding. Do not place near heat sources such as gas stoves, ovens and heaters. Doing so may cause deformation or discoloration of the Mug.
Warnings & Cautions Avoid dropping or hitting against hard surfaces. Damage to the plastic or stainless steel surface of the Mug may reduce its ability to retain heat. Clean the Milan Body after every use. Not cleaning thoroughly may cause the Main Body to rust, beverages to spoil, or cause pinholes. Do not remove the sticker on the bottom of the Main Body. Doing so may cause rust or holes.
How to Use: @ Follow the instructions for care and wash the Lid Set, the Inside and outside of the Main Body thoroughly before use. 1 Remove the Lid Set from the Main Body. Remove the Lid Set from the Main Body by turning remove counterclockwise as illustrated. the Lid Set 2 Fill the Main Body with | Drink Level | beverage. space below therm {j= For better heat retention, preheat or precook the Main Body with hot water (cold water} for about one minute, and Inside of the then fill it with your beverage.
How to Use: continued @ Follow the instructions for care and wash the Lid Set, the Inside and outside of the Main Body thoroughly before use. 5 Open the Lid Cover. Push the Button and release to open the Lid Cover. 6 Drink the beverage. @ Do not tilt the Mug suddenly when 0 drinking. (The beverage may spill and cause scalding or stain clothes.) I 7 Close the Lid Cover and lock. © With the Mug at an upright position, close the Lid Cover until ele it clicks.
How to @ Clean the product after each use to prevent odors and mold, and to keep the product sanitary. @® Always disassemble the product before cleaning. (see p.2) (Wash with warm water and mild dish washing liquid using a soft sponge. ®Rinse, shake a few times and wipe dry. ® When washing the Lid Set, disassemble it first then wash and dry. ® Uso a small brush sold in stores if necessary. (Wash with warm water and mild dish washing liquid using a Interior soft sponge with handle.
