RFF LJ Instruction Manual STAINLESS MUG Model SM-HE Name of Each Part Lid Cover Lid Cover Gasket Stopper Cover Safety Lock Sip Area ©® Be sure that all parts are correctly placed or installed before each use. © The illustrations used in this instruction manual may differ from the actual product you have purchased. Please read these instructions before use, and keep for future reference.
Important Safeguards ® Please follow these instructions to prevent scalding, deterioration and discoloration of beverages, as well as malfunction and staining of the Mug. Do not allow infants or small children to use this product. Keep out of the reach of infants and small children. Mishandling may causal injury or scalding. Always make sure that the Gaskets are attached during use. Contents may leak and cuss scalding or stains. Do not attach parts other than those specifically designed for this product.
Important Safeguards continued ® Please follow these instructions to prevent scalding, deterioration and discoloration of beverages, as well as malfunction and staining of the Mug. Do not fill with beverages while the Lid Set is attached. Doing so may cause beverages to overfill and may cause booming and scalding. Do not place near heat sources such as gas stoves, ovens and heaters. Doing so may cause deformation or discoloration of the Mug.
Warnings & Cautions Av old dropping or hitting against hard surfaces. Damage to the plastic or stainless steel surface of the Mug may reduce its ability to retain heat. Clean the Main Body after every use. Not cleaning thoroughly may cause the Main Body to rust, beverages to spoil, or cause pinholes. Do not remove the sticker on the bottom of the Main Body. Doing so may cause rust or holes.
© Follow the instructions for care and wash the Lid Set, the inside and outside of the Main Body thoroughly before use. © When you first use the product, there may be a plastic smell. However, this will become less noticeable with use. "1 Remove the Lid Set from the : Remove Main Body. the Lid Set = Remove the Lid Set from the Main Body by turning it counterclockwise as illustrated. %, "2 Fill the Main Body with beverage.
How to Use: continued 5 Open the Lid Cover. Push the Button and release to open the Lid Cover. Opens [> The Lid Cover opens slightly. [pr Hi Push” "6 Drink the beverage. © Do not tilt the Mug suddenly when drinking. (The beverage may spill and cause scalding or stain clothes.) # Fold down and hold the Handle when drinking. 7 Close the Lid Cover and lock. [A (© With the Mug at an upright position, securely until close the Lid Cover until it clicks.
How to Disassemble the Lid Set: continued 3 Remove the Lid Cover Gasket. Pinch the edge of the Lid Cover Gasket as illustrated and pull it toward you to remove. Lid Cover Gasket How to Assemble the Lid Set: © Be sure to attach the Stopper Cover Set, Lid Cover Gasket, Stopper and Stopper Gasket correctly to prevent malfunction or leaking of beverages. "1 Attach the Lid Cover Gasket. Align the Small Opening on the Lid Cover Gasket with the protrusion on the Lid Cover and press to attach.
© Clean the product after sate use to prevent odors and mold, and to keep the product sanitary. © Always disassemble the product before cleaning. (see (D Wash with warm water and mild dish washing liquid using Exterior a soft sponge. N @ Rinse, shake a few times and wipe dry. Lid Set @® When washing the Lid Set, disassemble it first then wash and dry. ® Use a small brush sold in stores if necessary. (@ Wash with warm water and mild dish washing liquid using a soft sponge with handle.
