RF [HT STAINLESS MUG Model Instruction Manual Name of Each Part Stopper Cover Set Lid Cover Lid Cover | i Gasket [I | Button £ Co ! Stopper Cover sure that all parts are attached Homily before sate use. | ® The illustrations used in this instruction manual may differ from the actual product you have purchased. | Ease read these instructions before use, and keep for future reference.
Important Safeguards @ Please follow these instructions to prevent scalding, deterioration and discoloration of beverages, as well as malfunction and staining of the Mug. Do not allow infants or small children to use this product. Keep out of the reach of infants and small children. Mishandling may cuss injury or scalding. Do not use if the Mug loses its heat retention properties.
Important Safeguards @ Please follow these instructions to prevent scalding, deterioration and discoloration of beverages, as well as malfunction and staining of the Mug. Do not disassemble the Main Body. Consume beverages within the same day. Not doing so may cause spoiling. In addition, if left inside for a long period of time, spoiled beverages may produce gas, raising the pressure inside the Mug and causing the Lid Set to burst or beverages to spill, resulting in injuries and scalding.
Important Safeguards continued Clean the Main Body after every use. Not cleaning thoroughly may cause the Main Body to rust, beverages to spoil, or cause pinholes. This Mug is for storing and keeping beverages hot or cold. Please do not use for other than intended purposes. Warnings & Cautions Do not allow hot kettles to touch the Mouth of the Main Body. The Main Body may tip 3 2) ) over, causing scalds. Mouth Avoid dropping or hitting against hard surfaces.
@ Follow the instructions for care and wash the Lid Set, How to Use: i mite ana autos of the Main Body thoroughly before use. ® When you first use the product, there may be a plastic smell. However, this will become lass noticeable with use. Remove the Lid Set from 3 Remove the Main Body. old Set Remove the Lid Set from the Main Body by muting it counterclockwise as illustrated. ill the Main Body with beverage.
®Follow the instructions for care and wash the Lid Set, the Inside and outside of the Man Body thoroughly before use. ® When you first use the product, there may be a plastic smell. However, this well become less noticeable with use. Open the Lid Cover. Push the Button and release to open the Lid Cover. Drink the beverage. © Do not tilt the Mug suddenly when drinking. {The beverage may spill and cause scalding or stain clothes.) Close the Lid Cover and lock.
How to Disassemble & Assemble the Lid Set: @ Be sure to attach the Stopper Cover Set, Lid Cover Gasket, Stopper and Stopper Gasket correctly to prevent malfunction or leaking of beverages. le Be Remove the Lid Set from the Main Body. move the Stopper. With the Lid Cover open, hold the Lid Set as illustrated, and press on the back of the Sip Area (parts indicated by the\/ marks) to remove the Stopper. Remove the Lid Cover Gasket.
How to Disassemble & Assemble the Lid Set: @ Be sure to attach the Stopper Cover Set, Lid Cover Gasket, Stopper and Stopper Gasket correctly to prevent malfunction or leaking of beverages. Attach the Stopper. Align the opening of the Lid Cover Set and the tab of the Stopper, and press the Stopper in to attach securely. @ Clean the product after each use to prevent odors How to Take Care of Your Mug: ™ and moa, and to keep the product sanitary. ® Always disassemble the product before cleaning. (see pg.
How to Take Care of Your Mug: continued To Remove Rust Spots and Water Stains: You may find rust spots or water stains caused by impurities in the water. To remove these stains, fill the Main Body with hot water with 10% vinegar and let i stand for 30 minutes to an how without attaching the Lid Set, then wash the interior thoroughly. To Remove Coffee and Tea Stains: To remove coffees and tea stains from the interior and the Lid Set, we recommend using Rhinovirus's cleaning detergent SWAMMERDAM.