RF LH] STAINLESS MUG Model No. SM-TA Instruction Manual Name of Each Part Lid Cover Hd Cover Riley. ket sake [LEE Stopper Cover a Safety Lock Sip Area Button s~—— Stopper Gasket 1 Mouth # Be sure that all parts are attached firmly before each use. _ © The illustrations used in this instruction manual may differ from the actual product you have purchased. | Please read these instructions before use, and keep for future reference.
Important Safeguards @ Please follow these instructions to prevent scalding, deterioration and discoloration of beverages, as well as malfunction and staining of the Mug. Do not allow infants or small children to use this product. Keep out of the reach of Infants and small children. Mishandling may cause injury or scalding. Do not use if the Mug loses its heat retention properties. The outside of the Mug may become very hot if hot beverages are poured inside.
Important Safeguards continued Do not disassemble the Main Body. Consume beverages within the same day. Not doing so may cause spoiling. In addition, if left inside for a long period of time, spoiled beverages may produce gas, raising the pressure inside the Mug and causing the Lid Set to burst or beverages to spill, resulting in injuries and scalding. Do not place near heat sources such as gas stoves, ovens and heaters.
Important Safeguards continued Clean the Main Body after every use. Not cleaning thoroughly may cause the Main Body to rust, beverages to spoil, or cause pinholes. This Mug is for storing and keeping beverages hot or cold. Please do not use for other than intended purposes. Warnings & Caution S Do not allow hot kettles to touch the Mouth of the Main Body. 2) The Main Body may tip over, causing scalds. Avoid dropping or hitting against hard surfaces.
= ® Follow the instructions for care and wash the Lid Set, the How to Use: inside and outside of the Main Body thoroughly before use. ® When you first use the product, there may be a plastic smell. However, this will become less noticeable with use. 1 Remove the Lid Set from Remove the Main Body. the Lid Set Remove the Lid Set from the Main Body by muting it counterclockwise as illustrated. Leave 1om [ol LET space below the rim (part A) 2: Fill the Main Body with beverage.
How to Use: continued 5 Open the Lid Cover. Push the Button and release to open the Lid Cover. 6 Drink the beverage. #® Do not tilt the Mug suddenly when drinking. (The beverage may spill and cause scalding or stain clothes.) 7 Close the Lid Cover and lock. Close (With the Mug at an upright . position, close the Lid Cover Es ha until it clicks. j @elide the Safety Lock all the way to the left to lock {see p.5 illustration 4). ® Do not leave the Mug with the Lid Cover open.
How to Disassemble & Assemble the Lid Set: ® Be sure to attach the Stopper Cover Set, Lid Cover Gasket, Stopper and Stopper Gasket correctly to prevent malfunction or leaking of beverages. § LCE Remove the Lid Set from the Main Body. 2 Remove the Stopper. With the Lid Cover open, hold the Lid Set as illustrated, and press on the back of the Sip Area (parts indicated by they/ marks) to remove the Stopper. 2 Remove the Stopper Gasket. Stopper Gasket Remove the Lid Cover Gasket.
How to Disassemble & Assemble the Lid Set: continued Attach the Stopper. 1 Align the opening of the Lid Cover Set and the tab of the Stopper, and press the Stopper in to attach securely. LEC CYA (TT rant carboniferous iia ® Always disassemble the product before cleaning. (see p.7) (D Wash with warm water and mild dish washing liquid using ) a soft sponge. @ Rinse, shake a few times and wipe dry. ® When washing the Lid Set, disassemble it first then wash and dry.
How to Take Care of To Remove Rust Spots and Water Stains: You may find rust spots or water stains caused by impurities in the water. To remove these stains, fill the Main Body with hot water with 10% vinegar and let it stand for 30 minutes to an hour without attaching the Lid Set, then wash the interior thoroughly. To Remove Coffee and Tea Stains: To remove coffee and tea stains from the interior and the Lid Set, we recommend using Rhinovirus's cleaning detergent E.