RFF LJ Instruction Manual STAINLESS MUG Model SM-ATE Name of Each Part *— Lid Cover Lid Cover = Gasket Stopper 3 Cover Set Button BN 7 s—— Stopper Cover Safety Lock Sip Area [7 Stopper Gasket Mouth ® Be sure that all parts are correctly placed or installed before each use. # The illustrations used in this instruction manual may differ from the actual product you have purchased. Please read these instructions before use, and keep for future reference.
Important Safeguards ® Please follow these instructions to prevent scalding, deterioration and discoloration of beverages, as well as malfunction and staining of the Mug. Do not allow infants or small children to use this product. Keep out of the reach of infants and small children. Mishandling may cuss injury or scalding. Always make sure that the Lid Cover Gasket and Stopper Gasket are attached during use. Contents may leak and cause scalding or stains.
Important Safeguards continued ® Please follow these instructions to prevent scalding, deterioration and discoloration of beverages, as well as malfunction and staining of the Mug. Do not open the Lid Cover with the Mug close to your face or tilted toward you. Hot beverages may suddenly come out or spew out and may cause scalding. Do not drink out of the Mug while driving. Doing so may cause scalds or stain the interior of the car or clothes. Attempting to use while driving may also cause serious accidents.
earnings & Cautions Av old dropping or hitting against hard surfaces. Damage to the plastic or stainless steel surface of the Mug may reduce its ability to retain heat Clean the Main Body after every use. Not cleaning thoroughly may cause the Main Body to rust, beverages to spoil, or cause pinholes. Do not remove the sticker on the bottom of the Main Body. Doing so may cause rust or holes. Sticker Do not damage the nonstick coating Inside the Main Body. Scratches may cause rust, holes or other problems.
@ Follow the instructions for care and wash the Lid Set, the inside and outside of the Main Body thoroughly before use. ® When you first use the product, there may be a plastic smell. However, this will become less noticeable with use. (1 Remove the Lid Set from the Main Body. Remove the Lid Set from the Main Remove Body by muting it counterclockwise the Lid Set as illustrated. | 2 Fill the Main Body with beverage.
How to Use: continued 5 Open the Lid Cover. Push the Button and release to open the Lid Cover. Opens LUCY] Cover may open slightly. Push Drink the beverage. ®Do not tit the Mug suddenly when drinking. {The beverage may spill and cause scalding or stale clothes.) Hi, 7 Close the Lid Cover and lock. 2, (D with the Mug at an upright position, securely until close the Lid Cover until it clicks. Lf @ Slide the Safety Lock all the way to the left to lock (see p.
How to Disassemble the Lid Set: continued 3 Remove the Lid Cover Gasket. Pinch the edge of the Lid Cover Gasket as illustrated and pull it toward you to remove. Lid Cover Gasket How to Assemble the Lid Set: ® Be sure to attach the Stopper Cover Set, Lid Cover Gasket, Stopper and Stopper Gasket correctly to prevent malfunction or leaking of beverages. 1 Attach the Lid Cover Gasket.
® Clean the product after each use to prevent odors and mold, and to keep the product sanitary. ® Always disassemble the product before cleaning. (see ® Wash with warm water and mild dish washing liquid using [SAC a soft spangle. i @ Rinse, shake a fow times and wipe dry. Lid Set @® When washing the Lid Set, disassemble it first then wash and dry. ® Use a small brush sold in stores if necessary. (D Wash with warm water and mild dish washing liquid using [1G] a soft sponge with handle.