~t7 RHINOVIRUS ~~ (HOUSEHOLD USE ONLY Instruction Manual STAINLESS STEEL VACUUM BOTTLE Model No. SS-PCE Name of Each Part Switch Stopper Gasket Mouth Strap @ Be sure that all parts are attached firmly before each use. ® The illustrations used in this instruction manual may vary from the actual product you have purchased. Please read these instructions before use, and keep them for future reference.
important Safeguards: @ Please follow these instructions to prevent scalding, deterioration or discoloration of beverages, and malfunction or staining of the product. Keep the product out of the reach of infants and small children. Do not allow them to play with the product. Mishandling may cause injury or scalding. Do not swing the bottle by the Strap. Doing so may cause injury or damage. Do not carry the bottle by the Cup or Stopper. Dropping the bottle is dangerous.
important Safeguards: continued @ Please follow these instructions to prevent scalding, deterioration or discoloration of beverages, and malfunction or staining of the product. Leave 1 om (1/2 inch) of space on top when filling the Main Body. Otherwise, contents may overflow when you attach the Stopper, or the Spout may become difficult to open.
Warnings and Cautions: continued Hot tea may discolor if stored for a Do not close the Stopper with a tea long period of time. We recommend bag left inside. using tea bags to brew tea right before | The tea bag may swe! and cause contents to consuming. leak or splatter The rattling noise that may bs heard when the product is shaken comes from copper or aluminum foil in the vacuum insulation intends to increase heat {cold} retention, and does not indicate a malfunction.
How to Use: continued 's N Pour the beverage. Spout Switch @ With the bottle upright, open the Spout by pulling out the Switch on the er Open Stopper in the direction of the arrow. Close @ Tilt the bottle and pour the beverage U | out from the Spout. ® After pouring, return the bottle to an upright Sl position and close the Spout by pushing the = Switch in the direction of the mow. & Alter pouring beverages, slave the bottle in an upright position for 2-3 seconds before closing the Spout.
How to Take Are of Your Bot lie: continued When Cleaning Your Product: @ Do not clean using paint thinner, benzine, metal wire scrub brushes, scrubbing brushes that include abrasive cleaners, polishing powders, cleansers, melamine sponges, or any similar items. @Do not use chlorine bleach. © Do not soak in water for an extended period of time. @ Wipe moisture off thoroughly to prevent water stains or rusting.
How to Take Care of Your Motile: continued a _ ™\ Remove the Stopper Gasket. Soak a soft sponge in warm water and mild dish washing liquid and wash both the Stopper and Stopper Gasket, then dry them both. If there is Walter remaining inside the Stopper, pour it out of the Drainage Hole. Shake the Stopper a few times and then wipe it dry. (if water is left inside the Stopper, it may leak out later and stain Drainage Hole your clothes or bag.) \ HN How to Attach the Stopper Gasket: Line up the recess in the S
How to Take Are of Your Bot lie: continued Replacement Parts: We take care in only using materials that are safe and hygienic for food contact. However, if plastic parts become damaged or their surfaces become rough, please replace them for optimum performance. The Stopper and Stopper Gasket may need to be replaced due to time and wear. Please check them about once a year. When replacing parts, please record the model number and part name beforehand.