Rk) Stainless Steel Tumbler Model No. SX-FSE Instruction Manual ®This product is not leak proof. ®Be sure that all parts are attached firmly before each use. ®The illustrations used in this instruction manual may vary from the actual product you have purchased. Name of Each Part 4— Lid Cover * When drinking hot beverages, be careful not to scald yourself.
Important Safeguards @ Please follow these instructions to prevent scalding, deterioration and discoloration of beverages, as well as malfunction and staining of the Tumbler. Keep out of the reach of infants and small children. Do not allow them to play with this product. Mishandling may cause injury or scalding. Do not tilt or shake the product, even when the Sip Hole is closed. The beverage may Saki and cause scalding. Do not attach parts other than those specifically designed for this product.
Important Safeguards continued @ Please follow these instructions to prevent scalding, deterioration and discoloration of beverages, as well as malfunction and staining of the Tumbler. Clean the Lid Set and Main Body after every use. @ Although the Main Body is made of 18/8 stainless steel, salt from foods such as soups and sports drinks may cause rust resulting in loss of thermal insulation. @® Not doing so may cause spoilage, mold, odors, and discoloration. It may also cause beverages to leak.
How to Use @Folio the Instructions for care and wash the Lid Set and Main Body thoroughly before use. Remove the Lid Set from the Main Body. Lift the Tab on the Lid with your finger. Maximum Fill the Main Body with a beverage, [Fil Line and reattach the Lid Set. When using tea leaves, first add the tea leaves and then pour in the hot water before reattaching the Lid Set. Securely attach the Lid Set by pushing it into the Main Body while rotating it slightly with the Sip Hole closed.
Disassembling the Lid Set 1 Remove the Tea Leaf Strainer. Toa Leaf Strainer Remove the Tea = Leaf Strainer from the Lid Set. L ) LZ Remove the Lid Cover Lock. Remove the Lid Cover Lock while holding down the Lid Cover. @ When removing the Lid Cover Lock, hold the Lid Cover down so that it does not come loose from the Lid and fall off. Lid Cover Lock Remove the Lid Gasket. Remove the Lid Gasket starting from the Notch.
Assembling the Lid Set Attach the Lid Gasket. Attach the Lid Gasket, making sure that the Tab is facing out. The Tab is facing out. Attach the Lid Cover and Lid Cover Lock. Insert the Lid Cover Into the Lid, and attach the Lid Cover Lock while holding down the Lid Cover. Attach the Lid Cover Lock securely so that it clicks ode Lo place f Cover down that it does not | Attach the Tea Leaf Strainer securely so that it clicks into place.
How to Take Care of Your Tumbler @Clean the product after each use to prevent odors and mold, and to keep the product sanitary. @Always disassemble the product before cleaning. (See P5) (Wash lightly in warm water and mild dish washing liquid using h a soft sponge. @Rinse, and then shake several times and wipe moisture out to Main Body, dry thoroughly. Disassemble the Lid Set before washing and drying. ®Use a small store-bought brush or similar implement for hard-to-clean areas.
How to Take Care of Your Tumbler @Clean the product after each use to prevent odors and mold, and to keep the product sanitary. Replacing the Lid Set and Lid Gasket: We take care in only using materials that are safe and hygienic for food contact. However, if plastic parts become damaged or its surface becomes rough, please replace them for optimum performance. The Lid and other consumable pairs may need to be replaced due to time and wear. Please check them about once a year.