User manual

TCP/IP Configuration

Step 7 On the IP Address tab, select Obtain an IP address automatically. Then click

OK.

Step 8 When returning to Network window, click OK.

Step 9 Wait for Windows copying files.

Step 10 When prompted with System Settings Change dialog box, click Yes to restart your

computer.

For Windows NT 4.0

Step 1 Click Start, point to Settings, and then click Control Panel.

Step 2 Double-click the Network icon.

Step 3 The Network window appears. On the Protocols tab, check out the list of installed

network components.

Option 1: If you have no TCP/IP Protocol, click Add.

Option 2: If you have TCP/IP Protocol installed, go to Step 7.

Step 4 Highlight TCP/IP Protocol and click OK.

Step 5 Click Yes to use DHCP.

Step 6 Insert the Windows NT CD into your CD-ROM drive and type the location of the

CD. Then click Continue.

Step 7 Returning to the Network window, you will find the TCP/IP Protocol among the

list. Select TCP/IP Protocol and click Properties.