User manual

TCP/IP Configuration

For Windows 2000

Step 1 From the Start menu, point to Settings and then click Network and Dial-up

Connections.

Step 2 Right-click the Local Area Connection icon and then click Properties.

Step 3 On the General tab, check out the list of installed network components.

Option 1: If you have no TCP/IP Protocol, click Install.

Option 2: If you have TCP/IP Protocol, go to Step 6.

Step 4 Highlight Protocol and then click Add.

Step 5 Click Internet Protocol(TCP/IP) and then click OK.

Step 6 When returning to Local Area Connection Properties window, highlight Internet

Protocol (TCP/IP) and then click Properties.

Step 7 Under the General tab, enable Obtain an IP address automatically and then click

OK. When prompted to restart your computer, reboot it to enable the settings.