User manual

Advanced Configuration
LAN Setting
This page allows you to define the IP address over the LAN interface.
IP Address & Subnet Mask:
Allows you to specify the private IP address on the device’s LAN
interface.
By default, the IP address and subnet mask is 192.168.0.1 and 255.255.255.0. It is
recommended NOT to change the default settings.
Note
If you have changed the LAN IP address, you will need to correspondingly change the
IP address of the DHCP server as well as its pool address range. If you didn’t do that,
the DHCP client will not be able to access the router.
Enable NAT Function: Enabling NAT function allows multiple LAN machines to access the
Internet for the cost of only one IP address. If you are going to enable this feature, check the
box and click Apply.
DHCP Server: Allows you to enable or disable the DHCP function. DHCP server is enabled
by default. When you instruct the router to act as a DHCP server, it assigns dynamic IP
addresses to your PCs (DHCP clients) whenever they request for IP information. The DHCP
server “leases” the IP addresses from a defined pool for a specified amount of time to the PCs.
DHCP helps system administrators to centrally manage the assignment and distribution of IP
information to PCs on the LAN.
27