UTR-20 Assembly Instructions

Step 7: Shadow Plate Installation:

NORTH

SOUTH

(4) 1/4"-20 x 3/8" ZP ROUND HEAD SLOT SCREWS

(4) 1/4" SS LOCK WASHERS

(4) 1/4" ZP FENDER WASHERS

SHADOW PLATES

Diagram 7

• Remove the shadow plate hardware bag from within the main hardware bag. There will be one extra set of

hardware.

• Screw the ¼” round head slot screws through the lock washer and then the fender washer, through the

shadow plate and into the welded rectangular nuts on the canisters.

• Make sure that the Zomeworks logo is right side up on one of the shadow plates.

• The tracker will NOT function WITHOUT the shadow plates installed.