User guide
Chapter 2: ZonePlayer Setup and Operation
2-6
If you are connecting a ZonePlayer 80
Once you have connected the ZonePlayer to your home network, follow the steps 
below to connect to an external amplifier:
1. Attach the power cord and plug in the ZonePlayer 80.
The Mute button indicator and the ZonePlayer Status indicator will begin to flash.  
(If this ZonePlayer was previously connected to another Sonos Digital Music System, 
the ZonePlayer Status indicator may light solid white instead.)
2. Connect your ZonePlayer 80 to an external amplifier by choosing one of the 
following options:
Connect to a home theater or amplifier
• If you have digital inputs on your home theater or amplifier, you can use either a 
TOSLINK optical audio cable or a digital coaxial cable to connect the ZonePlayer 
80’s digital output to the digital input on the receiver.
• If you have analog inputs on your home theater or amplifier, use a standard RCA 
audio cable to connect a ZonePlayer’s analog audio output to the audio inputs 
on the receiver. 
• Select the proper input channel on the receiver.
• After you finish setting up your Sonos system, go to "Using Line-out" to adjust 
the volume settings.
Connect to a computer or powered speakers
• You will need a stereo mini to RCA Y-adapter audio cable (one 1/8-inch stereo 
miniplug to dual RCA male connectors) to connect the ZonePlayer’s analog au-
dio output to the computer’s audio input. 
• You may need a Y-adapter audio cable (one1/8-inch stereo miniplug to dual 
RCA male connectors) to connect the speakers to the audio outputs on the 
ZonePlayer. If your speakers have a male 1/8-inch stereo plug, you will need to 
attach a female-to-female coupler between the speaker plug and the Y-adapter 
audio cable.
Note: If you are replacing the wired ZonePlayer in an existing Sonos Digital Music 
System with a ZonePlayer 80, first add the new ZonePlayer 80 to your music system. 
You can then unplug the wired ZonePlayer, replace it with the ZonePlayer 80, and 
move the original ZonePlayer to a new location.










