User Manual

INDEX of FUNCTIONS

TO: THEN:

Activate the RFID tags so they can be read Position the Zonar 2010’s spotlights within 2

inches of tag; press READ/ENTER

Add incremental values of 1 Press the UP arrow

Add incremental values of 10 Press the RIGHT arrow

Accelerate adding/decreasing values Hold the (UP/RIGHT/DOWN/LEFT) arrow

after pressing

Answer “No” to questions Press the red N (no) button

Answer “Yes” to questions Press the green Y (yes) button

Charge the batteries Place the Zonar 2010 into its vehicle mount,

10x charger or RDS

Darken the text on screens • Highlight SET CONTRAST from main menu

by scrolling the cursor with the DOWN arrow;

press the RIGHT arrow

• Press the UP arrow to increase the percentage

• Press READ/ENTER to set contrast

Decrease incremental values by 1 Press the DOWN arrow

Decrease incremental values by 10 Press the LEFT arrow

Delete text Use the “<” character

Determine the battery level of the main menu Locate the drawing of a battery on the title line

Note: Completely black = fully charged

Determine operator who stored previous report • Press the RIGHT arrow after REPORT

HISTORY on the main menu

• Press the RIGHT arrow after the first report in

the list on the REPORT HISTORY screen (to

go to the next screen)

• Highlight OPERATOR

Enter a “Green” condition

(for components that are OK) Press the green Y (yes) button

Enter mileage • Position the Zonar 2010’s spotlights within 2

inches of Asset tag; press READ/ENTER button

• Use the UP/RIGHT arrows to add increments;

hold to accelerate adding increments

• Press READ/ENTER