User Manual

12
INDEX of FUNCTIONS
TO: THEN:
Enter text for an “OTHER” component or
condition that’s not listed • Use the UP, DOWN, RIGHT, LEFT arrows to
select the character you want (use the “>”
character for a space; to erase text use the
“<” character)
• Press READ/ENTER
• Press the Info button when you’ve
completed entering text
Note: The maximum number of characters you
can select is 18.
Enter a “Red” condition (for components
that are BAD) Press the red R (no) button
Highlight your selection from a list Scroll the UP/DOWN arrows to make your
selection
Lighten the text on screens • Highlight SET CONTRAST from main menu
by scrolling the cursor with the DOWN arrow
• Press the RIGHT arrow
• Press the DOWN arrow to decrease the
percentage
• Press READ/ENTER to set contrast
Log in • Press READ/ENTER button
• Place your Zonar ID Card within 2 inches of
the Zonar 2010’s spotlights
Read a RFID tag • Position the Zonar 2010’s spotlights within
2 inches of tag
• Press READ/ENTER
Review most recent inspection report • Press the RIGHT arrow after REPORT
HISTORY on the main menu
• Press the RIGHT arrow after the first report
in the list on the REPORT HISTORY screen
Store the current report Press the green Y (yes) button when the Store
Report screen appears
Transmit completed pre and post inspection Place Zonar 2010 into Reader Downloading
reports to Zonar Systems Station (RDS)
Turn the Zonar 2010 on/off • Press the Power button once to turn the
Zonar 2010 on or off
Turn the spotlights on/off Press the Light button
View the next screen for an item that has the
character > displayed Press the RIGHT arrow