User's Manual

System Settings

To Access the System Settings Function

To Adjust Contrast

To Select a Mode

To Access the Sound Setting

Fail safe

When using Wireless Master, Rotate the roller to Bind

then press. The following screen appears:

Slave turn on the transmitter and bind it simultaneously.

Enter Slave mode :

Press and hold the roller while turning on the transmitter.

When System Setup appears on the screen, release the

roller. The AH6T is now in System Setup Mode.

Rotate the roller to the channel you need to setup then

press

Rotate the roller to the digital you need to setup then

press and set the parameter.

Use the System Setting screen to establish the overall

transmitter setting that will apply to ALL model memories.

Press and hold the roller while turning on the transmitter.

When System Setup appears on the screen, release the

roller. The AH6T is now in System Setup Mode.

Highlight System Settings then press. The following

screen appears:

Then the following screen appears:

In the Systems Settings screen rotate the roller to

highlight User Contrast then press.

Rotate the roller to adjust the contrast (from 1 to 20)

noting it on screen. Press to accept.

Rotate the roller to select the mode then press

Rotate the roller to select the mode (from 1 to 4)

Press to accept.

In the Systems Settings screen rotate the roller to

highlight Sound Setting then press to adjust the speaker

sound.