User's Manual

Function Mode
Airplane Model
Servo. Reverse
Servo. Travel
Servo. Speed&trim
D/R and Expo
Differential
Throttle Cut
Throttle Curve
Flap System
Mixing
Timer
Monitor
Multicopter Model
Servo. Reverse
Servo. Travel
Servo. Speed&trim
D/R and Expo
Helicopter Model
Servo. Reverse
Servo. Travel
Servo. Speed&trim
D/R and Expo
Throttle Cut
Throttle Curve
Swashplate
Gyro
Pitch Curve
Mixing
Timer
Monitor
Servo Reverse
To Access the Inactive Warning Time Setting
To Access the Reverse Function
Throttle Cut
Throttle Curve
Program Aux
Timer
Monitor
Rotate the roller to access the inactive warning time
setting then press and set the parameter.
The AH6T organizes the programming screens in two
separate categories: System Setup Mode and Functions
Mode. Function Mode programming adjusts a model’s
flight characteristics at the field.
To Access the Function List
With the transmitter on and the main or telemetry screen
displayed, press the roller. The Function list displays.
Rotate the roller to highlight Servo.Reverse then press.
The following screen appears:
Rotate the roller to the channel you need to setup then
press
If it is Throttle Channel, the following screen appears:
Press "Yes", to change the direction of servo / channel.
14