User's Manual

16
5.5 IMEI
International Mobile Equipment Identity number. Switch off the mobile
phone and take off the battery, then you will see the label with such number
on the back of the mobile phone. Also, this number is saved in the mobile
phone. After switch-on, in standby state, input “*#06#” to display it.
5.6 IP dial
Firstly, in Settings/Call Settings, set correct IP access number. Enter the
phonebook and choose IP Dial.
Note: Regarding whether to activate IP dial when dialing local call, please
consult the network operator.
6. Basic operation
6.1 Switch on
Press the switch-on/off key to start the mobile phone, then the screen will
display switch-on image. Then you can enter Settings menu to set phone
modes, including Only SIM On, and Flight. The defaulted one is Only SIM On.
After insert SIM card, the mobile phone will automatically check the SIM
card availability, and then it will be shown information as following on the
display by sequence:
1. “Input phone password”——If you have set the password.
2. “Input PIN” —— If you set SIM card password.
3. “No service”—Indicates fail to make register and cannot make any calls.
4. “Emergency calls only”—indicates has registered to other network and
only can make call to 112.
5. “Searching”—the mobile phone is searching network until find
appropriate network;
6. “Operator name”—Indicates network successfully registered.