User's Manual

27
Note: Some settings need network support. For example, call barring can not
be used unless the local network and SIM card open it.
7.4 Settings
User Profiles
Your mobile phone is provided with multiple profiles so that you can
customize some settings in different cases for different events. Firstly, as per
your personal hobby, have individualized settings on profile and then activate
it. You can have such profiles as General, Meeting, Outdoor, Indoor, Headset,
Headset.
The content can be edited at every profiles mode as following:
 Tone Setup: Include Incoming Call, power-on, power-off, Message
Tone and Key Tone.
 Volume: Set the volume of Ring and Key Tone.
 Alert type: You can choose any one from Ring, Vibration, Vibration and
Ring ，Vibration then Ring as the current ring mode.
 Ring Type: You can choose any one from single, repeat and ascending
as the current ring type.
 Extra Tone: You can have on/off settings on Warning Tone, Error Tone,
camp on Tone and Call Connect Tone so as to have corresponding
tone tips.
 Answer Mode: You can choose whether to use any key to answer.
After individualized settings, choose “Activate” in “Select” to start profiles.
Note: After the headset is inserted into the mobile phone, the mobile phone
will automatically change into headset profile. Unplug the headset to return to
the previous profile.
In standby state, you can press # key to switch to silence profile and again to
the previous profile.
Dual SIM settings
You can in any place and at any time set the dual-mode mobile phone as the