- Zonet 802.11n Wireless PCI Adapter User Manual

802.11n Wireless PCI Adapter

1. Definitions:

Profile Name:

Name of the profile, preset to PROF* (* indicate 1, 2, 3,)

SSID:

The public name of a wireless network, Service Set IDentifier

Network Type:

Infrastructure and/or Ad-Hoc

Authentication:

Open, Shared, (Leap), WPA-PSK, WPA2-PSK, WPA and WPA2

Encryption:

WEP, TKIP, AES, and None

Channel:

Channel of the connected wireless network

2. Add :

to create a new profile

3. Edit :

to edit/modify/change parameter of an existing profile

4. Delete :

to delete an existing profile

5. Activate :

to make an existing profile become active and to connect

4.1.1 Add/Edit Profile

a. Configuration

1. Profile Name: Specify one name for the profile

2. SSID: Name of intended wireless network, User can key in the intended SSID name

or use pull down menu to select from available Access Point.

3. Network Type: you can select one from Infrastructure and Ad-hoc modes

Infrastructure:

A wireless Router and/or Access Point is required.

Ad-hoc:

Peer-to-Peer network, no base station required.

4. Power Save Mode: Choose from CAM or PSM.

CAM (Constantly Awake Mode):

ZEW1642 will stay power-ON as long as the

computer is connected to a power outlet.

PSM (Power Saving Mode):

ZEW1642 will hibernate when the computer is

hibernating.