User guide

7
install more than one access point to cover an entire building or campus, as shown in Figure 1-4. In this
scenario, access points hand the client off from one to another in a way that is invisible to the client,
ensuring roken connectivity. Wireless clients can roam seamlessly between different coverage areas and
remain connected to the network.
Figure 1-4 Multiple-AP and roaming
Wireless Router and IP Sharing
In infrastructure mode, in addition to acting as a bridge between an Ethernet and wireless network, the
AP can be configured as a wireless router and IP sharing device for Internet access as shown in Figure
1-5. You don’t have to buy an expensive router. Nor you have to buy several modems and setup phone
lines. Just share one AP, one Modem, single dial-up account, and one phone line, dozens of network
users can go surfing the Internet concurrently.
Figure 1-5 Wireless router and IP Sharing