Specifications

KVM Switch User’s Guide
12
A plus mark (+) to the left of a name indicates the port is cascaded to a
Slave; the number at the above of the channel number (left corner) shows
the number of port the Master link, i.e.
8 means link from upper KVM port 8
(Master layer is blank). <ENTER> key brings you one level down and the
screen pops up listing the names of the computers on that Slave KVM. The
name of the Slave will be shown at the OSD menu. It is useful to group
computers and still be able to see the group name.
Press <R> will return to upper layer OSD menu.
Press <ESC> key to exit OSD and to return to the selected computer; the
computer name is also shown on the screen (banner).
z F1: Setup Mode
Figure: OSD setup screen
All change is use left/right arrow key (← →) to select it.
■Scan Mode: Select – Scan selected channel.
PC ON – Scan power on PC channel only.
■Scan Time: 5sec(Default) to 90sec., 5sec. a select step
■Banner Display Time: 5sec. (Default), 10sec., 15sec. and always on (∞).