2-Port DVI KVM Switch Model# KVM3402 Installation Guide
Hardware Installation: All hardware must be powered OFF during hardware installation. 1. 2. 3. 4. 5. Connect DVI cables to KVM3402 and Source Input Devices Connect Output Device to KVM3402 console port Power ON all hardware Do not switch between devices during power up process Hardware installation is now completed and your KVM3402 is ready to operate.
Push Buttons and LED Indicators: Push Buttons: Use the Selected button on the front panel to select PC port LED Indicators: Online: [ON] Source Input Device is selected and it is power-ON [FLASH] Source Input Device is selected but it is power-OFF [OFF] Source Input Device is not select or nothing connects to the port Power: [ON] Source Input Device is power-ON, all KVM cables are securely connected [OFF] Source Input Device is power-OFF, KVM cables are loosed, or nothing is connected.
Troubleshooting Tips: 1. Make sure all KVM cables are connected securely, properly and well-seated 2. Suggested to label all KVM cables accordingly to avoid confusion 3. Do not move or press any mouse button when switching between ports 4. Do not move or press any key on keyboard when switching between ports. Keyboard error may occur. 5. Why my keyboard is not working after the computer is boot-up? a. KVM3402 only supports 101-, 102-, and 104- keyboards b.