Product specifications

802.11n Wireless PCI Adapter

1.6 Change the PCI Bracket

ZEW1642D comes with an additional low-profile bracket for fitting in small

computer chassis.

Follow the steps below to change and install the low-profile bracket for your

ZEW1642D. Make sure the original standard bracket is removed from the PCB

before installing the low-profile bracket.

1. Removing standard bracket as following steps:

a. Important! Discharge yourself from any

static by touching the metal siding of your

chassis.

b. First remove antennas and the

two-side screws on the PCB of the

original standard bracket.

c. Next detach the original standard

bracket from the PCB.

Note: Suggested to keep the original

standard bracket for future use.

2. Install the low-profile bracket and

replace the screws and antennas.

Note: Do not over tightening the screws

on the bracket!