Package Contents • • • One ZFS3015P / ZFS3018P One Quick Installation Guide One Power Adapter Contact your local authorized reseller or the store purchased from for any items damaged and/or missing. Top Panel LED indicators LED Power Status Operation Green Steady: Power is ON LNK/ACT Steady: Network cable connected and connection established Green Flash: Data packets are transmitting Off: Network cable is unplug Diagram a.
b. ZFS3018P Note: Power Connector is on the marked side of ZFS3018P Rear Panel a. ZFS3015P 5 RJ-45 ports b.
Installation 1. Connect the provided power adapter to the Power connector of the ZFS3015P / ZFS3018P 2.
Troubleshooting 1. Check the power adapter and power wall-jet to make sure they are function properly. Check if the switch is turned-ON and power LED is steady. 2. Check all cable connections between computer and the switch to make sure they are connected properly. 3. Maximum distance is 100 meters from the switch to end nodes. 4. Link LED(s) is ON/flashing at the connected port(s) of the switch. 5. Test your computer’s network adapter to make sure it is installed and functioned properly. 6.