Instruction manual

Configuration from Embedded Web Server
5 - 27
In the print server's SNMP implementation, the
following MIB objects are available for updating.
MIB Object Names Description
system.sysContact Indicates the network
administrator's name.
system.sysName Indicates the print
server's name for
identification.
system.sysLocation Indicates the location of
the print server.
snmp.snmpEnableAuthenTraps
Enables or disables the
function of sending
SNMP Authentication
Failure trap message to
the network
administrator, if the
community name within a
SNMP request is not
correct.
Users can set up print server’s SNMP functions by using
their browsers.
1. Click Setup, it then appears the sub-menu.
2. Click SNMP, it then as shown in the following picture.