User manual

IP Enter IP Address of ZVC7610W

Default IP Address: 192.168.0.30

Subnet Mask Enter Subnet Mask of ZVC7610W

Default Subnet Mask: 255.255.255.0

Default

Gateway

Enter Default Gateway of ZVC7610W

Default address: 192.168.0.1

Primary/

Secondary

DNS

DNS (Domain Name System) translates

domain names into IP addresses. Enter the

Primary and Secondary DNS that provided by

ISP.

- PPPoE: Select this option when you use a direct connection via the ADSL modem.

Enter your PPPoE Account User Name and Password. ZVC7610W will get the IP

address from your ISP when starting up.

NOTE: When setting up the IP Setting with PPPoE account, ZVC7610W gets the IP

address from your ISP during start up and will send a notification email to you

automatically. Therefore, you have to setup email/DDNS in advanced when using

PPPoE as your connection type.

DDNS Setting allows you to assign a fixed host and domain name to a dynamic

Internet IP address. Select Enable to use this feature. Then select the Provider from

the drop-down list. Enter the required information to the Host Name, User Name, and

Password boxes. You must sign-up for a DDNS service with a DDNS provider in

advanced.

 UPnP

ZVC7610W supports UPnP (Universal Plug and Play) which enables device-to-device

interoperability from a set of computer network protocols. It also supports port auto

mapping function so that you can access the ZVC7610W even it is behind an NAT

router or a firewall. Select Enable to enable this feature.

 Ports Number

- HTTP Port: Default HTTP port is 80

NOTE: We suggested to use port 1024 ~ 65535 if ZVC7610W is behind an NAT router or

a firewall.