User manual

Network >> IP Filter

The IP Filter setting allows the administrator limits users within a range of IP address to

access the ZVC7610W.

 Start/End IP Address

Assign a range of IP address that is NOT allowed to access the ZVC7610W. Enter the

Start IP address and End IP address. Click Add to save the setting. You can repeat

this step to assign more than one range of IP address.

For example, when you enter 192.168.0.50 for the Start IP Address and 192.168.0.80

for the End IP Address, all computers whose IP address set within 192.168.0.50 ~

192.168.0.80 will NOT be able to access the ZVC7610W.

 Deny IP List

It displays all of the IP addresses that are NOT allow to access the ZVC7610W. Click

Delete to clear range of IP address or a single IP address.

Network >> Wireless Setting

 Wireless

Select Enable to enable wireless function for ZVC7610W.

- Network ID (SSID): “default” SSID allows your ZVC7610W connects to any access

point under the infrastructure network mode. To connect your ZVC7610W to a

specific access point, you have to set the corresponding access point SSID. Set the

same wireless channel and SSID when connects it to an Ad-Hoc mode.

Click Site Survey to display all available wireless networks, so you can easily

connect to one of the available wireless networks.

List of searching results