User manual

- Wireless Mode: Select the type of wireless communication for ZVC7610W

 Infrastructure

 Ad-Hoc

- Channel: Select the appropriate wireless channel

- Authentication: Select an authentication method to secure ZVC7610W from being

used by unauthorized wireless users.

 Open

 Shared-key

 WPA-PSK

 WPA2-PSK

Open Default setting of authentication mode.

It communicates the encryption key

across the wireless network.

Shared-key Only allow communication with

wireless devices with identical

encryption settings.

WPA-PSK/

WPA2-PSK

WPA-PSK / WPA2-PSK are designed

for users who do not have network

access and must manually enter

password to their access

point/gateway and each computer

within the wireless network.

The following settings must complete if you choose Open or Shared-key as the

Authentication mode.

Encryption: Select WEP option to enable data encryption feature to secure

ZVC7610W within the wireless network

Format: Select ASCII or HEX format for your encryption key according to the

wireless network setting.

Key Length: Select WEP key length according to the wireless network setting.

Hex 64 bits: 10 characters (use only 0~9 & A~F)

Hex 128 bits: 26 characters (use only 0~9 & A~F)

ASCII 64 bits: 5 alphanumeric characters

ASCII 128 bits: 13 alphanumeric characters

WEP Key 1/2/3/4: Enter the # of WEP key(s) in the following boxes. WEP Key #

must match with your wireless network setting.

The following settings must complete if you choose WPA-PSK or WPA2-PSK as the

Authentication mode.

Encryption: Select TKIP or AES.

TKIP (Temporal Key Integrity Protocol) changes the temporal key every 10,000

packets to provide greater security than standard WEP setting.