User manual

4.9 Tools

The Tools menu provides commands that allow you to restart and/or reset the ZVC7610W.

You can also backup, restore your configuration, and upgrade firmware for the ZVC7610W.

 Factory Reset

Click Reset to restore all factory default settings for the ZVC7610W.

 System Reboot

Click Reboot to restart the ZVC7610W. It will power OFF the under then power ON

automatically. ZVC7610W configuration will be retained after System Reboot.

 Configuration

You can save your ZVC7610W configuration as a backup file on your computer. You

can restore it by retrieving the backup file.

- Backup: Click Get the backup file to save the current configuration of the

ZVC7610W to your computer.

- Restore: Click Browse to locate the backup file and click Restore the configuration

of the ZVC7610W.

 Update Firmware

It displays the current firmware version. You can upgrade it once you obtained a latest

version of firmware.

- Select the firmware: Click Browse to locate the updated firmware file and click

Update.

NOTE: ZVC7610W must be power ON during firmware upgrade. Otherwise, the original

firmware may corrupt due to the failure of firmware upgrade.