User's Manual

Appendix B: Front and Back Panels
117
The following table describes the back panel.
Port or
Button
Description
Turns the X6v on or off.
POWER
Port to connect the unit to the
X6’s power cube.
ETHERNET 1
ETHERNET 2
ETHERNET 3
ETHERNET 4
Ethernet ports that can connect the unit to an access
point, a network hub, or the Ethernet port of a
computer. The
X6v has four Ethernet ports.
Each port has a yellow and a green light above it. The
yellow light turns on when the port is connected to a
100 megabit per second Ethernet port. The green light
blinks when there is activity on that particular Ethernet
line.
RESET
Resets the modem to its factory settings. To reset,
insert a paper clip and press the button three times.
DSL
Jack to connect the modem to the DSL telephone wall
jack.