User's Manual

Chapter 1: Installation Instructions
15
If you are not prompted for a User Name and Password,
do the following in this order: Recheck all connections;
restart the modem and computer; and reset the modem by
inserting a paper clip into the Reset pinhole in the
modem’s back panel and pressing it three times.
Important:
For security, choose your own X6v password after the setup is
complete. See Changing Your Password on page 107.
3
3 After you log in, use the Basic Setup page to configure the
modem so it can connect with your Internet service provider.
• To use Automatic Configuration (recommended):
a At Configure my connection, click Start.
b In the "Settings successfully detected" message box,
click OK to return to the Basic Setup page.
c If the X6v finds a PPPoE or PPPoA connection, on
the Basic Setup page enter the user name and
password given to you by your Internet Service
Provider.