User's Manual

Chapter 3: Setting Wireless Security

Setting Up Security Using WPA2

or WPA

WPA2 and WPA use a passphrase that you choose and enter on

the X6v and other wireless devices on the network (clients) to set

up security. To use WPA2 or WPA, all of the wireless devices on

your network must support that encryption method.

1 Check to see that all other clients that you plan to put on the

network support WPA2 or WPA. If they do not, skip to

Setting Up Security Using WEP.

2 Click the Wireless icon in the Zoom Configuration

Manager. This will open the Wireless Setup page. Go to

Encryption (which should say None) and select WPA2 or

WPA from the drop-down menu. A new fill-in box labeled

WPA Passphrase will open directly below the Encryption

box.

3 Choose and enter a Passphrase. You can enter a word or

phrase, or for greater security you can enter a combination of