User's Manual

Chapter 3: Setting Wireless Security
36
4 If any or all of the other wireless devices on the network
(clients) are not Zoom devices, you will enter one of the
keys shown below the Passphrase on each client. You must
enter the same key for each device. The key that you must use
is the key corresponding to the Default Key number shown. If
the number in the default key box is 1, use Key 1, and so on.
You can choose the default key you prefer using the pull-down
Default Key menu box.
Now that you have a key, enter it for each client. Every
wireless network client needs to be set individually. Open the
software that came with the device, which should be running
on the computer where the device is installed. Find the
configuration menu for security, choose WEP (64-bit or 128-
bit depending on what you selected), and enter the Default
Key, exactly as it appears on the X6v
Wireless Setup page.
Your security setup configuration is now complete!