User's Manual

Chapter 6: Using Advanced Setup
64
This button… Opens a page that lets you…
DSL Status
View information, such as the DSL Line State, and
Upstream and Downstream speeds.
Wireless
Status
View information, such as your Link Speed, SSID,
Default Channel, and Mac Address of your
wireless computer.
Ethernet
Status
View information about Rx (Receive) and Tx
(Transmit) Packets.
To see sample reports, go to page 101.
Administration Options
The buttons in the Administration group are typically used for
administrative tasks, such as updating the modem’s firmware,
changing your Zoom Configuration Manager password, putting
back your modem’s configuration file.
The following table lists each button in the Administration group
and gives a brief description of the things that you can do with that
feature.
This button… Opens a page that lets you…
Admin Password
Change the password to the Zoom
Configuration Manager. The original user
name and password are:
User name: admin
Password: zoomDSL
Firmware Update
Specify the path to the upgrade file you
need to update your firmware. Use the
Browse button on this page to navigate to
the file, then click the Upload button to
perform the firmware update.
System Log
View data generated or acquired by routine
system communication with other devices.
This information does not necessarily
represent unexpected or improper
functioning and is not captured by the
system traps that create alarms. You can
save the system log to a file.
Restore Factory
Settings
Reboot the
X6v and reset its configuration
to the factory defaults.