User's Manual

Chapter 6: Using Advanced Setup
65
This button… Opens a page that lets you…
Backup/Restore
Config
Save your current configuration settings so
that they may be restored at a later time.
Diagnostic Tests
Run a diagnostic test to help isolate any
problems you may be having.
Using the WAN Configuration
Settings
When do I need the WAN Configuration page?
The WAN Configuration page contains critical information about
your Wide Area Network (WAN), DSL setup, and Internet access.
Some of these values are provided by your ISP/DSL provider and
need to be entered on this page. To determine if you need to add
other values, read the table descriptions that follow the picture.
Note that Protocol, Encapsulation, VPI, VCI, PPP, and NAT
also appear on the Basic Setup page. Most likely you have already
entered values for these settings and only need the WAN
Configuration page for setting up an advanced feature such as
enabling a disconnect timeout on your PPP connection.