User's Manual

Chapter 6: Using Advanced Setup
71
Using the Ethernet Configuration
Settings
Do I need to change my Ethernet settings?
The Ethernet Configuration page contains information about the
Ethernet ports on your DSL modem. Typically you should not
need to change these settings. However, if you are having problems
establishing your Ethernet connection, you may need to change the
Speed/Duplex value to match that of the Ethernet NIC in your
computer. Here is a picture of the Ethernet Configuration page:
The following table describes the Ethernet Configuration settings.
If you change any of the settings, click Save Changes, and then
Write Settings to Flash.
Setting Description
Port
The Ethernet Ports 1-4 on the back of your
modem.
Configuration
Shows how your Ethernet ports are set up.