User's Manual

Chapter 6: Using Advanced Setup

Enabling or Disabling UPnP

Universal Plug and Play (UPnP) with Internet Gateway Device

(IGD) protocol is installed in X6v units when they are shipped by

Zoom. Change this setting only if you have a good reason to do so.

To change the status of Universal Plug and Play, on the Advanced

Setup page click UPnP:

Setting Description

Enable UPnP IGD

Function

Select this check box to enable or disable

Universal Plug and Play with Internet

Gateway Device (IGD) protocol. By default

UPnP is enabled.

Click Save Changes and then Write Settings to Flash to save

your UPnP setting to permanent memory.