User's Manual

Chapter 6: Using Advanced Setup

Note that on the QoS screen, Port 1 is the Ethernet port labeled

ETHERNET 1 on the X6v back panel. Port 2 is ETHERNET 2,

and so forth.

Setting Description

Do you want to turn

on QoS . . . .?

If you click YES to assign priorities to the

X6’s ETHERNET and wireless ports, by

default ETHERNET port 1 is set to High

Priority, ETHERNET port 2 is set to

Medium Priority, and ETHERNET ports 3

and 4 as well as the wireless port are set to

Standard priority. These default settings

can be changed.

The default is NO.

Which ports should

be High Priority?

Select one to three ports. By default, these

ports will together share 70% of the

upstream bandwidth. You can configure a

different percentage on the Advanced

QoS page (see page 100).

Which ports should

be Medium Priority?

Select one to three ports. By default, these

ports will together share 20% of the

upstream bandwidth. You can configure a

different percentage on the Advanced

QoS page (see below).

Advanced QoS page

Click this link to specify a different

upstream bandwidth percentage for High,

Medium and Standard priorities.