User's Manual Part 3

How to HotSync with Palm Bluetooth SDIO and Tungsten T
Please make sure you have installed Bluetooth software and Palm Desktop on your
notebook or desktop PC before proceeding to the setup instructions below.
(1) From the Palm main panel, tap the HotSync icon.
(2) Tap HotSync and select "Connection Setup" from the menu bar.
(3) Tap "New".
(4) Give the new connection a name, e.g. BTConnection.
(5) Change "Connect to:" to "PC".
(6) Change "Via:" to "Bluetooth".
(7) The "Device:" option will pop up, tap to find the Bluetooth system you wish to HotSync
with.
(8) Select the Bluetooth system you wish to HotSync with and tap OK.
(9) Tap "Yes" when prompted with "Do you want to add *** to your trusted device list?".
(10) Key in the same passkey on Palm and your notebook or desktop PC to complete the
pairing process.
(11) Tap "OK" and "Done" to return to the HotSync panel
(12) Tap the dropdown menu to select the Bluetooth connection you have just created. E.g.
BTConnection
(13) From the notebook, find out the local COM port used by "Bluetooth Serial Port", e.g.
COM4. (My Bluetooth Places->My Device, right click My Bluetooth Serial Port and select
Properties)