User's Manual Part 3

How to dial-up from Palm Tungsten T to my PC's modem to surf
the Internet
(1) Enable Bluetooth on your PC and make sure you can dial up to the ISP with your
modem.
(2) On your Palm, in the main panel, tap "Prefs", select "Communication", and select
"Network".
(3) Tap "New" button.
(4) Key in a new name for "Service:", e.g. pcmodem.
(5) Key in the "User Name:"
(6) Key in the "Password:"
(7) Tap on "Connection" and select "Edit Connections..." to create a new connection setup.
(8) Tap "New" button.
(9) Key in a new name for "Name:", e.g. btmodem
(10) Tap on "Connect to:" and select "Modem"
(11) Tap on "Via:" and select "Bluetooth"
(12) Tap on "Device:", wait for your PC to be found
(13) Select your PC and tap "OK"
(14) Palm will ask you to add your PC to the trusted device list, tap "Yes"
(15) Key in a numeric passkey, e.g. 1, and tap "OK"
(16) Type in the same passkey on your PC, now the pairing process is complete
(17) Make sure "Dialing:" is set at "Touch Tone"
(18) Tap the "OK" button and "Done" to return to the Network page
(19) Tap on "Connection:" and select the connection setup you've just created
(20) Tap on "Phone:" and enter the phone number of your ISP
(21) Tap the "Connect" button and the modem on your PC should start dialing
(22) Once connected, launch a web browser and you should be surfing the Internet.