User's Manual Part 3

50
(5) If the receiving device is prompted that it is preparing to receive a file, click Accept to
receive the files. Depending on the options selected, it may ask to open the file. Click Open
to open the file.
(H) Synchronizing a Bluetooth-Enabled Palm Powered Device
With a Computer Using Palm HotSync Manager
If you have a Bluetooth-enabled, Palm Powered device, you can synchronize data
between the device and a Bluetooth-enabled Macintosh using Palm HotSyncR Manager.
Make sure you have Palm Desktop 4.0 installed on your computer. For the latest version of
the Palm Desktop software, go to www.palm.com/macintosh
(AA) Setting up Your Computer to Synchronize With the Palm Powered Device
(1) Open HotSync Manager, located in the Palm folder in the Applications folder on your
hard disk.
(2) Select “bluetooth-pda-sync-port” in the Connection Settings tab.
Note: Make sure Enabled is selected in the HotSync Controls tab.
(AB) Setting Up Your Palm Powered Device to Synchronize With Your Computer
The following setup procedure only needs to be done once. Depending on the device, the
names and locations of some menus may be different. For precise instructions, see the
documentation that came with your device.
(1) Open HotSync on your Palm Powered device.
(2) Choose Connection Setup from the Options menu.
(3) Click New to create a new connection and name the connection.
(4) Choose PC from the “Connect to” pop-up menu and choose Bluetooth from the Via
pop-up menu.
(5) Tap to find Bluetooth-enabled devices and choose your device from the list. Click OK.
(6) Click OK, and then click Done.
(AC) Synchronizing Your Handheld Device With Your Computer
(1) Choose the Bluetooth connection from the Connections pop-up menu.
(2) Click the HotSync icon.