User's Manual Part 3

If the "Accept other" key does not exist, simply create it with type DWORD and fill in the

value.

Save and exit Regedit. Reboot if necessary, now you should be able to send files from

Nokia 7650 to your notebook or PC.

Q4: How come some devices within the connection range may not show up in the list of

devices found?

A4: Your device is configured to report only specific types or classes of devices (Bluetooth

Configuration Panel > Discovery tab, on your device). The unlisted device is configured to

be non-discoverable (Bluetooth Configuration Panel > Accessibility tab, on the un-listed

device).

Q5: Cannot connect to a paired device.

A5: Paired devices are always displayed in My Bluetooth Places, even if the remote device

is out of range or not powered up.

Verify that the remote member of the pair is within radio range, and powered up, and then

attempt the connection again.

Q6: Cannot discover services on an un-paired remote device

A6: The remote device may not be powered up or may be out of range.

z Verify that the remote device is powered up.

z Verify that the remote device is in Connectable mode (Bluetooth Configuration Panel >

Accessibility tab).

z Perform a Search for Devices to verify that the device is within range.

Q7: Dial-up networking service does not start.

A7: The Dial-up Networking service will not start unless a properly configured modem is

attached to the server.

z Verify that the modem is usable as a local device on the computer to which it is

attached. In the Bluetooth Configuration PanelÆLocal Services tabÆ double-click the

Dial-up Networking serviceÆClick the down arrow in the Modem field and select the

modem that will be used to dial out, click the OK button to close the Bluetooth Configuration

Panel.

Q8: Determine the Bluetooth device address (BDA) of my hardware device.

A8: In the Bluetooth Configuration Panel, on the Hardware tab, in the Devices section,

select the device you want to determine the address of. In the Device Properties section of

the dialog box, the fourth entry, Device Address, is the BDA of the selected Bluetooth

device.

Q9: Determine the version of the host controller interface (HCI)